Motherboard
SuperMicro H8SSL-i2
Processor/Chipset
Celeron 420
1.60GHz Processor
800FSB
512k BSB
System Memory
Capacity Four 240-pin DIMM sockets
Supports up to 8 GB DDR2 800/667/533 MHz memory
Single or Dual (recommended) channel memory
DDR2 800/667/533MHz un-buffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1GB, 2GB
Voltage 1.8V only
On-Board Devices
4 SATA Ports using ServerWorks HT1000 controller
Supports UDMA Mode 5
Supports PIO Mode 4
Supports ATA/100
1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI)
Remote Management Module
(Card not included)
Broadcom BCM5704C Dual Gigabit Ethernet Controller
Supports 1000BASE-T, RJ45 output
ATI ES1000 Graphics Controller
Super I/O Winbond 83627HF
Expansion Slots
1x 64-bit 133MHz PCI-X (3.3V) slot
Input / Output
Up to four SATA devices
Single ATA 100 EIDE channels support up to two UDMA IDE devices
Supports UDMA Mode 5
Supports ATA/100
1 Floppy port; 1.44 MB
2 RJ45 LAN ports
2 USB Rear Ports
4 USB Internal Headers
USB 2.0 Compliant, 1.1 Compatible
1 VGA port
PS/2 keyboard and mouse ports
1 Fast UART 16550 serial ports
1 Header
System BIOS
4Mb Flash EEPROM with AMI® BIOS
SST-49LF004B BIOS Chip
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0
BIOS Rescue Hot Keys
SMBIOS 2.3
USB Keyboard support
Hardware BIOS Virus Protection
Chassis
SC512F-260
Dimensions
Height 1.7" (43mm)
Width 16.8" (427mm)
Depth 14.0" (356mm)
Gross Weight 17 lbs (7.7kg)
Available Colors Beige, Black
Front Panel
Power On/Off button
Reset button
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
2x USB Ports (2.0 Ready)
Peripheral Drives
TEAC Slim 24x CD-ROM drive
System Cooling
2x 4cm 3-pin Nidec Counter-rotating Fans
Power Supply
Thermal control 260W AC power supply with PFC
[ 24-pin, 4-pin=12V, (2) 4-pin ]
AC Voltage 100 - 240V, 60-50Hz, 4 Amp Max
DC Output 5V + 3.3V = 140W
+5V 25.0 Amp
+5V standby 2.0 Amp
+12V 18.0 Amp
-12V 1.0 Amp
+3.3V 15.0 Amp
PC Health Monitoring
Monitors CPU Core Voltages, +5V, ±12V, 5.5V Standby, 2.5V Standby, VBAT
Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
CPU 4-phase Switching Voltage Regulator
Total up to five 3-pin fan headers
5 Fan Status Tachometer monitoring
Status Monitor for Speed Control
Temperature Monitoring for CPU and chassis environment
CPU Thermal Trip support
I2C temperature sensing logic
CPU / Overheat LED
Suspend-state indicator LED
+5V Standby Alert LED
Chassis Intrusion Header
Chassis Intrusion Detection
SDDC Support
Chipkill Support
